萝博派对 logo萝博派对

萝博头

价格
未公开
类型
人形机器人 · 人类尺度人形机器人
应用场景
科研教育 · 开发者套件 / 科研教育 · 教育平台 / 科研教育 · 科研平台
状态
原型
开源情况
可得性
未发布
购买方式
未公开
发布时间
2026年9月28日
国家/地区
中国
24 DOF
总自由度
135 cm
高度
约 39 kg
重量
3 h
续航时间

RP1 是萝博派对面向科研、教学与机器人开发的开源双足人形机器人,高1.35米、重约39千克,拥有24个主动自由度。标配运控头、假手与RK3588计算模块,支持电池热插拔、模块替换及软硬件二次开发。

ROBOTO 01(RP1)

硬件规格

整机规格

手臂长度
50 cm
材质
AL6061/7075 铝合金、工程塑料与特种橡胶
总自由度
24 DOF

运动性能

最大爬坡角度
30 °
最大移动速度
≤4 m/s
台阶越障高度
5 cm

自由度

单臂可控自由度
5 DOF
厚度/深度
20 cm
头部自由度
0 DOF
高度
135 cm
单腿自由度
6 DOF
腰部自由度
2 DOF
重量
约 39 kg
宽度
45 cm

机械结构

末端执行器
假手
关节内走线
24 V 内走线,预留转接板
关节类型
四款自研双级行星内转子模组

传感器

深度相机
Intel D435i(选配)
IMU
高精度六轴 IMU ×1

电池与续航

电池容量
10 Ah
电池类型
大小双电池设计
充电方式
USB-C 快充与磁吸充电
充电功率
140 W
充电时间
1.5 h
热插拔支持
电池热插拔,无需关机
供电方式
支持边充边用
续航时间
3 h

计算平台

板载计算
RK3588 ×1;开发计算模块选配

安全与防护

急停功能
遥控与随身急停装置,三路冗余
工作温度范围
-10–40 °C
关节防夹
关节全包围防夹手设计

交互与通信

通信
Wi-Fi 6、蓝牙 5.2、4G
外部接口
USB Type-A ×2、USB Type-C ×2、RJ45 ×2

开发与扩展

配置选项
可换运控、交互、数采和感知头
二次开发/SDK
ROS 2、SDK、仿真环境与训练代码

二次开发

ROBOTO 01(RP1)当前型号

有条件开放

仅既有RP1:官方将RP1对应24身体关节、Pro对应28身体关节另加2头部,手指另计。本批仅对应身体开发配置,条件为交付机械修订、LRO CAN-FD controller/FW、IMU/hostSDK ABI、个体零位方向/总线ID映射和闭链踝解算匹配。固定inference b3eaa0bb6a9d/motors a5c930a06a16/description8c12d13ae051;官网与固定源码的API默认值/周期/type标签不同,须整套版本兼容并核实际契约。保留物理参数/价格状态/发布,两个Pro既有记录不合并;未执行软硬件。

萝博头原型机

有条件开放

仅既有RobotoOrigin/RPO原型非RP1/Pro。deploy95be3502 gitlink固定inferenceb3eaa0bb/motorsa5c930a0,Git tree只读未checkout执行。RPOconfig23DM槽/四CAN+HIPNUCserial,实际sign-offset-urdf2motor/闭链踝映射,不改物理DOF。匹配交付model固件/USB-CAN/零位config/已build ROS2Humble或Jazzy,单owner;父聚合GPL不重授submodule/binary/assets。

Exact existing RP1 record. Official series documentation maps RP1 to24 body joints and RP1 Pro to28 body joints plus2head joints; hand axes are counted separately. This batch covers the corresponding body development configuration only, conditional on matching delivered mechanical revision, LRO CAN-FD controller/firmware, IMU, host SDK ABI, calibrated zero/sign/bus-ID maps and closed-chain ankle conversion. Source pins: inference b3eaa0bb6a9d, motors a5c930a06a16, description8c12d13ae051. The current website and pinned source differ in API defaults, control periods and robot type labels; use one mutually compatible pinned stack and verify its actual contract. Preserves existing physical specifications, price/status and publication state; the two Pro records remain separate. No software/hardware executed. Body position/hybrid interface: apply_action(p,v,kp,kd,tau), URDF-to-motor permutation and sign conversion, wrapped state and nearest-turn targets. Supply every position and gain entry; actual pinned validation requires finite kp>0 and kd>=0 for every motor. The website says optional gains default from configuration, but this pinned Python binding requires explicit p,v,kp,kd; only tau has a default. Position/velocity targets must match the 24-entry body layout; check finite values, limits and state freshness before invocation. CAN-FD batches use motorID-1 in8slots per bus. Parallel ankles convert desired joint PD+feedforward to actuator position targets with positive gains. This is position development, not an independent zero-kp velocity or pure torque mode. get_joint_tau is derived from get_motor_current; the pinned LRO feedback decodes CurMax amperes, so do not interpret it as measured jointNm or apply a torque-space inverse-transpose to raw current. No independent velocity/Nm/FF, Cartesian, navigation, teleoperation or persistent collection claim is added. Constructor opens hardware interfaces; init status does not aggregate per-driver success, refresh waits then reads cache.

开发能力

关节级控制有条件支持
C++ SDK有条件支持
位置命令有条件支持

身体position/hybrid:apply_action(p,v,kp,kd,tau),URDF-motor顺序/方向和wrap/最近圈目标;必须完整位置/增益长度,固定版要求每项finite kp>0/kd>=0。官网说gain可省而此Python固定版p/v/kp/kd必传、仅tau默认。24项身体顺序、finite/limits/新鲜度须核;CANFD按motorID-1在每bus8槽。并联踝将jointPD+FF转为正gain执行器位置目标,非独立零kp速度/纯力矩。get_joint_tau来自get_motor_current,LRO按CurMax反馈A,不当实测jointNm,原始current不直接套力矩逆转置。本批不填独立vel/Nm/FF/Cartesian/nav/teleop/持久采集。构造即开硬件,initflag不汇总驱动成功,refresh等待后读cache。

已知限制

  • 身体position/hybrid:apply_action(p,v,kp,kd,tau),URDF-motor顺序/方向和wrap/最近圈目标;必须完整位置/增益长度,固定版要求每项finite kp>0/kd>=0。官网说gain可省而此Python固定版p/v/kp/kd必传、仅tau默认。24项身体顺序、finite/limits/新鲜度须核;CANFD按motorID-1在每bus8槽。并联踝将jointPD+FF转为正gain执行器位置目标,非独立零kp速度/纯力矩。get_joint_tau来自get_motor_current,LRO按CurMax反馈A,不当实测jointNm,原始current不直接套力矩逆转置。本批不填独立vel/Nm/FF/Cartesian/nav/teleop/持久采集。构造即开硬件,initflag不汇总驱动成功,refresh等待后读cache。
信息来源 · 4

开源情况与制作资料

软件

部分开放

仅示例或辅助工具已公开,不能据此认定核心系统开源。

硬件设计

待核验

当前证据不足,尚未核实这一维度的公开情况。

制作资料

待核验

当前证据不足,尚未核实这一维度的公开情况。

类型资源许可证适用版本前往
代码roboparty_inference · scoped primary-code license

GitHub · Roboparty/roboparty_inference

Complete pinnedGPLv3 grant for primary roboparty_inference C++/pybind source, consistent with parent license inventory. Bundled ONNX/runtime libraries/checkpoints, NPZ/motion data/models and subdependencies remain separately scoped; no execution or whole-robot licensing claim.

GPL-3.0-onlyrp1_24dof_cpp_body_b3eaa0bb, rp1_24dof_python_body_b3eaa0bb, rp1_24dof_ros2_documented_interfaces前往 GitHub

商业状态

状态
原型
价格
未公开
发布时间
2026年9月28日

时间线

  1. 机器人发布
    ROBOTO 01(RP1)
提交来源或更正