TheRobotStudioSO-101
SO-101은 TheRobotStudio와 Hugging Face가 공동 개발한 차세대 오픈소스 로봇 팔입니다. 배선과 리더 모터를 개선해 조립을 간소화했고, LeRobot에서 원격 조작과 모방 학습을 지원합니다.

인텔리전스 프로필
실험은 기본 탑재를 의미하지 않습니다. 근거는 명시된 모델 버전에만 적용됩니다.
하드웨어 사양
자유도 및 구동
자유도
기계 구조
배터리 및 작동 시간
개발 지원
SO-100
개발 개방SO-101현재 모델
개발 개방개발 구성: SO-101 LeRobot follower + leader reference
The designer explicitly supports LeRobot for SO-101; the pinned LeRobot revision registers both so100_follower and so101_follower against the documented Python position-control implementation. Match the exact arm, Feetech motors, power supply, USB bus, motor IDs and calibration. A leader arm is an operator input device, not an additional execution arm.
개발 기능
문서화된 제약
- This reviewed profile sends Goal_Position targets. Torque enable/disable, gripper torque/current protection limits and PID gains do not establish direct torque, feedforward or independent joint-velocity APIs. Cameras are optional hardware; dataset upload is optional and requires a Hub account/token when enabled. One follower executes; the separate leader supplies operator input.
출처 · 4
- 공식raw.githubusercontent.com ↗확인일: 2026-11-05
- 공식raw.githubusercontent.com ↗확인일: 2026-11-05
- 공식raw.githubusercontent.com ↗확인일: 2026-11-05
- 공식raw.githubusercontent.com ↗확인일: 2026-11-05
오픈 소스 및 제작 자료
SO-101 Follower 제작 가이드
소프트웨어일부 공개
예제나 보조 도구만 공개되어 있으며 핵심 시스템의 공개를 의미하지 않습니다.
하드웨어 설계공개됨
자료를 받을 수 있지만 공개 자체가 재사용 권한을 의미하지는 않습니다.
제작 자료자료 완비
동일 버전의 부품 목록, 구조 파일, 조립 지침이 있습니다. 각 라이선스를 확인하세요.
관련 자료
- 열기
SO-100/SO-101 published design files · Apache-2.0
하드웨어적용 버전: so101_lerobot_62a171e7Apache-2.0
- 열기
LeRobot Python software · Apache-2.0
코드적용 버전: so101_lerobot_62a171e7Apache-2.0
- 열기
SO-101 3D 프린팅 가능한 구조 파일
하드웨어Apache-2.0
- 열기
SO-101 부품 목록
부품 목록Apache-2.0
- 열기
SO-101 조립 및 3D 프린팅 안내
안내Apache-2.0
- 열기
SO-101용 LeRobot 제어 라이브러리
코드Apache-2.0
상용화 상태
데이터셋 수록
타임라인
- 로봇 공개SO-101
- 모델 공개SmolVLA base
- 모델 공개Robometer 4B
- 모델 공개MolmoAct2
