The R1 EDU variant is listed with six degrees of freedom per leg on the official R1 page.
Unitree RoboticsR1 EDU
Unitree R1 EDU is a humanoid robot for research and education. It has 26–40 joint degrees of freedom, binocular cameras and an 8-core processor, and supports secondary development. Dexterous hands and high-performance computing modules are optional. It weighs about 29 kg with battery and runs for about one hour.

Capability Map
The official R1 EDU specifications list an optional dexterous hand.
Hardware Specification
Degrees of freedom and drive
Mobility & Payload
Mechanical and mounting
Mechanical Structure
Sensors
Battery and Runtime
Compute Platform
Interaction and Communication
Development and Expansion
Commercial Information
Development support
Development configuration: r1-edu-26dof
Exact documented development profile. Hardware, firmware and access conditions are recorded per capability.
Development capabilities
EDU r1-edu-26dof with matching SDK2 firmware and network access. The model-specific Python low-level example exposes q/dq and tau with kp/kd; not applicable to ordinary retail models or other joint layouts.
Sources · 1
- Officialraw.githubusercontent.com ↗Verified: 2026-11-05
Open source & build resources
Software
Partially availableExamples or supporting tools are available; this does not establish access to the core system.
Hardware design
Not verifiedThere is not enough verified evidence to establish this dimension.
Build resources
Not verifiedThere is not enough verified evidence to establish this dimension.
| Type | Resource | License | Applicable version | Open |
|---|---|---|---|---|
| Code | Unitree SDK2 Python GitHub · unitreerobotics/unitree_sdk2_python Pinned source revision 814556d15970dd2ecf1c9984e845ca02ab07e206. License applies to this repository; hardware, firmware, dependencies and robot access have separate terms. | BSD-3-Clause | r1_edu_26dof | Open GitHub |
Commercial Status
Deployment activity
R1 EDU begins classroom use in iCode Redmond’s youth robotics program
A first-person engineer report published September 28, 2026 says that during summer 2026 iCode Redmond began preparing and using its Unitree R1 EDU in a real classroom where students could write and test code on the physical robot. Only the year is recorded for this start event.
Deployment records
Statuses reflect historical reports; subsequent operating conditions are unknown.
Deployment records 1 · Pilot 1 · Project actual units · Undisclosed
- Partner
- iCode Redmond · Operator
- Scenario
- Education Platform
- Primary task
- Support a mentor-led robotics program where students write code and test robot behavior on a physical R1 EDU.Teaching and training support
- Location
- iCode Redmond, Redmond, Washington, United States
- Started
- 2026
- Last verified
- 2026-10-10
- Operating sites
- 1
Evidence scope
iCode Redmond identifies Unitree R1 EDU as the platform used for hands-on student programming. A local engineer’s first-person report identifies an R1 EDU used in a classroom during summer 2026. Only the year is recorded for the start date; exact start day, unit count, payment, and continuation after the documented period are unknown.
Deployment timeline · 1
R1 EDU begins classroom use in iCode Redmond’s youth robotics program
Timeline
- Robot releaseR1 EDU