HEBI RoboticsH25-90
H 시리즈 101:1 액추에이터.
- 출력 토크 · 연속
- 90 N·m
- 출력 회전 속도 · 최대
- 50 rpm
H25-90은 101:1 하모닉 감속기를 적용한 HEBI H 시리즈 모듈형 로봇 액추에이터입니다. 브러시리스 모터, 엔코더 및 제어 전자장치를 통합하며 IP65 설계 하우징으로 고토크 맞춤형 로봇 관절과 암에 적합합니다.
기술 사양
출력 및 전달
- 출력 토크 · 연속
90 N·m
- 출력 토크 · 피크
180 N·m
- 출력 회전 속도 · 최대
50 rpm
모델 기록 · 구성 적용 범위 미확인
- 개발 접근 권한
- 조건부 지원
- 액추에이터 기술
- 모듈형 로봇 액추에이터
- 침수 및 이물 보호 등급(IP)
- IP65용 설계
- 깊이
- 11.4 cm
- 길이
- 12.6 cm
- 무게
- 2.9 kg
- 너비
- 11.5 cm
- 감속비
- 101:1
- 작동 전압
- 24–48 V
- 비상 정지
- M-Stop 라인 입력, 5–48 V DC
- 작동 습도
- 0–90
- 작동 온도
- -10–50 °C
- 안전 시스템
- 옵션 브레이크, 전원 차단 시 잠금
출처 · 2
2026-09-24 · 2026-11-06
출력 회전 속도 · Max Speed · 50 RPM · 2, Technical specifications
출력 토크 · Cont. Torque · 90 N-m · 2, Technical specifications
출력 토크 · Peak Torque · 180 N-m · 2, Technical specifications
개발 접근 권한 · H25-90 appears in the series configuration table; series datasheet explicitly documents C/C++ and Python APIs.
액추에이터 기술 · 모듈형 로봇 액추에이터
침수 및 이물 보호 등급(IP) · IP65용 설계
깊이 · 11.4 cm
길이 · 12.6 cm
무게 · 2.9 kg
너비 · 11.5 cm
작동 전압 · 24–48 V
비상 정지 · M-Stop 라인 입력, 5–48 V DC
작동 온도 · -10–50 °C
안전 시스템 · 옵션 브레이크, 전원 차단 시 잠금
같은 시리즈 모델 비교
구성 2~4개 선택
선택한 구성 비교개발 지원
H25-140
조건부 개방H25-140 is explicitly listed in the official series datasheet with C/C++ and Python API support. Use compatible module firmware, matching API distribution, Ethernet discovery, exact family/name, calibrated actuator limits and model-specific gains. The reviewed native profile uses strategy 5 (FOC). H-Series motor torque feedback is current-based; this is not independent output strain-gauge torque measurement.
H25-90현재 모델
조건부 개방H25-90 is explicitly listed in the official series datasheet with C/C++ and Python API support. Use compatible module firmware, matching API distribution, Ethernet discovery, exact family/name, calibrated actuator limits and model-specific gains. The reviewed native profile uses strategy 5 (FOC). H-Series motor torque feedback is current-based; this is not independent output strain-gauge torque measurement.
H25-45
조건부 개방H25-45 is explicitly listed in the official series datasheet with C/C++ and Python API support. Use compatible module firmware, matching API distribution, Ethernet discovery, exact family/name, calibrated actuator limits and model-specific gains. The reviewed native profile uses strategy 5 (FOC). H-Series motor torque feedback is current-based; this is not independent output strain-gauge torque measurement.
H25-90 is explicitly listed in the official series datasheet with C/C++ and Python API support. Use compatible module firmware, matching API distribution, Ethernet discovery, exact family/name, calibrated actuator limits and model-specific gains. The reviewed native profile uses strategy 5 (FOC). H-Series motor torque feedback is current-based; this is not independent output strain-gauge torque measurement.
개발 기능
Each rotary module accepts joint-level position, velocity and effort commands through the discovered Group; radians, rad/s and N m apply in this strategy. This standalone actuator is not a complete arm or Cartesian controller.
Real Group command/feedback logging uses start_log/stop_log or C++ startLog/stopLog and .hebilog at the configured feedback frequency. Check log creation and directory permissions; Python log rollover may need a background thread. This is raw module telemetry, not an annotated multimodal demonstration dataset.
Pinned Python examples use hebi-py >=2.2.0, Python3 and GroupCommand.position/velocity/effort. Match the installed API/firmware and exact module identity; Python2 is excluded.
Pinned examples use native C++ GroupCommand and fetch hebi-cpp 3.15.0 with a fixed distribution checksum. Dependencies and matching firmware are required; no build or hardware execution is claimed.
GroupCommand.setPosition/position commands a rotary joint angle in radians with the matching position controller/gains enabled. It is an instantaneous setpoint; build and refresh trajectories separately.
The dedicated velocity example sets GroupCommand velocity in rad/s without a position target. Clear prior position commands with NaN and configure the velocity controller for the selected strategy; this is not merely a speed limit.
The combined position/velocity/effort example adds acceleration*inertia effort while tracking position and velocity. Strategy 5 (FOC) accepts additional user effort in N m; tune model-specific gains/inertia. It is not proof of whole-arm gravity compensation accuracy.
The dedicated effort example sends N m torque without position/velocity targets. Clear both previous targets using NaN and select strategy 5 (FOC). DIRECT_PWM normalized duty and direct FOC current/voltage are different modes. H-Series motor torque feedback is current-based; this is not independent output strain-gauge torque measurement.
문서화된 제약
- H25-90 is explicitly listed in the official series datasheet with C/C++ and Python API support. Use compatible module firmware, matching API distribution, Ethernet discovery, exact family/name, calibrated actuator limits and model-specific gains. The reviewed native profile uses strategy 5 (FOC). H-Series motor torque feedback is current-based; this is not independent output strain-gauge torque measurement. Position/velocity targets are rad/rad/s and rotary effort is N m only in the selected control strategy. Clear stale targets explicitly with NaN; an empty command may retain setpoints, and zero effort actively requests zero torque rather than disabling control. Refresh commands within configured command lifetime (publisher default 250ms); do not treat this as a motion-performance guarantee. Persist required strategy/gain settings deliberately across reboot. H default strategy5 differs from X/R strategy4. Examples use one test module and hardcoded names; adapt identities, not firmware modes blindly. Example-code licensing excludes binary APIs/dependencies/firmware/hardware. No exact 4DoF arm-kit integration is inferred.
출처 · 9
- 공식docs.hebi.us ↗확인일: 2026-11-06
- 공식raw.githubusercontent.com ↗확인일: 2026-11-06
- 공식docs.hebi.us ↗확인일: 2026-11-06
- 공식raw.githubusercontent.com ↗확인일: 2026-11-06
- 공식raw.githubusercontent.com ↗확인일: 2026-11-06
- 공식raw.githubusercontent.com ↗확인일: 2026-11-06
- 공식raw.githubusercontent.com ↗확인일: 2026-11-06
- 공식raw.githubusercontent.com ↗확인일: 2026-11-06
- 공식docs.hebi.us ↗확인일: 2026-11-06
오픈 소스 및 제작 자료
소프트웨어
일부 공개예제나 보조 도구만 공개되어 있으며 핵심 시스템의 공개를 의미하지 않습니다.
하드웨어 설계
일부 하드웨어 자료공식 H 시리즈 문서는 H25-45, H25-90, H25-140의 치수도, 클램프, 어댑터 및 암 링크 CAD를 연결하고 전원·광 이더넷·M-Stop 배선을 설명합니다. 부분적인 통합 자료이며 전체 액추에이터 제조 파일과 하드웨어 라이선스는 확인되지 않았습니다.
설명 보기제작 자료
미검증이 항목을 판단할 검증된 근거가 부족합니다.
| 유형 | 자료 | 라이선스 | 적용 버전 | 열기 |
|---|---|---|---|---|
| 코드 | HEBI native C++ examples · pinned Apache-2.0 primary code GitHub · HebiRobotics/hebi-cpp-examples The reviewed Apache-2.0 grant covers the primary example-project code at this commit. Downloaded C++ API wrapper/C binary distribution, dependencies, Python examples, firmware, actuator hardware and complete robot kits have separate licensing/access scope. | Apache-2.0 | hebi_h25_90_native_group_command | 열기 GitHub |
| 하드웨어 | HEBI H25 CAD·장착·배선 자료 docs.hebi.us 공식 H 시리즈 문서는 H25-45, H25-90, H25-140의 치수도, 클램프, 어댑터 및 암 링크 CAD를 연결하고 전원·광 이더넷·M-Stop 배선을 설명합니다. 부분적인 통합 자료이며 전체 액추에이터 제조 파일과 하드웨어 라이선스는 확인되지 않았습니다. | — | H25-90 | 열기 문서 |
| 도구 | H25-90 Strategy 5 게인 설정 docs.hebi.us H25-90의 공식 초기 게인 XML 설정입니다. H 시리즈는 Strategy 5를 사용하며 실제 기구와 용도에 맞게 제조사 지침으로 조정해야 합니다. 설정 파일이며 펌웨어 소스나 로봇 제조 자료가 아닙니다. 라이선스는 확인되지 않았습니다. | — | H25-90 | 열기 문서 |