Petoi logoPetoi

Bittle

가격
289달러부터 (STEM Lite 조립 키트; 다른 키트 별도 가격)
유형
4족 보행 로봇 · 소비자용 4족 로봇
적용 시나리오
연구 및 교육 · Developer Kit / 연구 및 교육 · Education Platform
상태
상용
구매 가능 여부
판매 중
구매 방식
미공개
공개일
2020년
국가/지역
미국
최대 0.45kg
일반 페이로드
약 1시간
작동 시간
0.04 m/s
보행 속도
0.265–0.29 kg
무게

Bittle은 취미 사용자, 학생 및 교육자를 위한 Petoi의 손바닥 크기 4족 보행 로봇 강아지입니다. 9개의 디지털 서보 관절과 오픈소스 OpenCat 시스템은 보행, 달리기, 묘기 및 로보틱스 학습을 위한 블록 코딩, Python, Arduino 및 앱 제어를 지원합니다.

Bittle

인텔리전스 프로필

실험은 기본 탑재를 의미하지 않습니다. 근거는 명시된 모델 버전에만 적용됩니다.

학습 방식공식 발표
원격 조작

기능 맵

이동공식 발표
보행

Petoi describes Bittle as a four-legged robot dog and states that its battery supports about one hour of continuous walking.

상호작용공식 발표
음성 상호작용

The official Bittle FAQ states that the robot processes voice commands locally and does not send voice to a server.

상호작용공식 발표
인간 협업

Petoi describes 35+ lifelike interactive movements, remote or app control, and use in team coding and social-interaction learning.

하드웨어 사양

물리적 사양

색상
검정 + 노랑, 검정 + 노랑 + 파랑
프레임 소재
플라스틱
기계 관절 수
9
소재
플라스틱
기립 시 크기
200 × 110 × 110 mm

이동성 및 페이로드

최고 속도
40 mm/s
일반 페이로드
최대 0.45kg
보행 속도
0.04 m/s

기계 및 장착

높이
0.11 m
길이
200 mm
무게
0.265–0.29 kg
너비
110 mm

기계 구조

관절 유형
디지털 서보

센서

카메라
카메라 선택 사양
IMU
6축 MPU6050
센서
6축 IMU(MPU6050) 및 적외선 수신기

배터리 및 작동 시간

배터리 유형
리튬 이온 배터리 팩
배터리 전압
7.4 V
충전 전력 요구 사항
USB 5V 1A
충전기
USB 5V 1A, 충전기 미포함
작동 시간
약 1시간

컴퓨팅 플랫폼

CPU
ATMega328P 마이크로컨트롤러
소프트웨어 알고리즘
OpenCat

상호작용 및 통신

부저 음량
내장 버저
원격 컨트롤러
원격 또는 앱 제어

개발 및 확장

앱 플랫폼
Petoi 데스크톱 앱 및 Petoi 모바일 앱
그래픽 프로그래밍
Petoi Coding Blocks
최대 중량
1 lb
2차 개발(SDK)
OpenCat Python API 및 Arduino IDE

상업 정보

보증
1년

개발 지원

Bittle현재 모델

조건부 개방

Bittle has model-scoped manufacturer programming documentation and serial Python/C++ interfaces. This is the legacy NyBoard model, using the NyBoard OpenCat build; the newer ESP32 Nybble Q/Bittle X V2 hardware is separate. Match the delivered board revision, servo variant, firmware model/calibration and host library. The reviewed body is the standard quadruped without an optional manipulation-arm add-on; legs are not counted as execution arms. Open source firmware/API code does not by itself license all hardware, dependencies or hosted assets.

Bittle X V2

조건부 개방

Bittle X V2 has model-scoped manufacturer programming documentation and serial Python/C++ interfaces. The current guide explicitly identifies this V2 model with BiBoard V1/ESP32; legacy docs explicitly exclude Bittle X V2. Match the delivered board revision, servo variant, firmware model/calibration and host library. The reviewed body is the standard quadruped without an optional manipulation-arm add-on; legs are not counted as execution arms. Open source firmware/API code does not by itself license all hardware, dependencies or hosted assets.

Bittle X V2+Arm

조건부 개방

Bittle X V2+Arm has model-scoped manufacturer programming documentation and serial Python/C++ interfaces. The current guide explicitly identifies this V2 model with BiBoard V1/ESP32; legacy docs explicitly exclude Bittle X V2. Match the delivered board revision, servo variant, firmware model/calibration and host library. The reviewed body is a quadruped with one attached execution arm/gripper. Open source firmware/API code does not by itself license all hardware, dependencies or hosted assets.

Use the model-specific board firmware: NyBoard/ATmega328P, selecting the actual Bittle or Nybble model; NyBoard revisions may require different serial baud rates. Manufacturer Python docs specify Python>=3.6 and pyserial3.5; use the dependency versions of the matching checkout. The C++ CMake serial client exposes joint sequences/simultaneous targets, while Python m/M use calibrated degree targets and ASCII/binary framing. Configure actual port, power, servo offsets and active-index map: the logical16-slot packet is not16physical actuators. Native serial motion does not establish joint-velocity/torque/FF or map-navigation APIs. Distinguish commanded angle reporting from actual feedback; ESP32 f-feedback requires supported servo hardware.

개발 기능

관절 수준 제어조건부 지원
Python SDK조건부 지원
C++ SDK조건부 지원
위치 명령조건부 지원
출처 · 5

오픈 소스 및 제작 자료

Bittle 키트 조립 안내

적용 버전: Bittle · NyBoard키트를 구매해 조립
공식 제작 가이드 보기
소프트웨어오픈 소스

소스 코드와 오픈 소스 라이선스가 확인되었습니다. 각 자료의 이용 조건을 따르세요.

하드웨어 설계일부 하드웨어 자료

NyBoard V1.0 논리 구성, 부품 및 전기 인터페이스 자료입니다. 해당 보드 탑재 키트에 적용되며 전체 제조 파일과 하드웨어 라이선스는 미확인입니다.

설명 보기
제작 자료조립 안내만 제공

Bittle 키트의 공식 그림·영상 조립 안내입니다. 키트 부품이 필요하며 독립 구매용 전체 BOM과 제조 파일은 미확인입니다.

설명 보기

관련 자료

  • OpenCat-Quadruped-Robot · pinned MIT primary software files

    코드적용 버전: petoi_bittle_native_serialMIT

    열기
  • opencat_serial_cpp · pinned MIT primary software files

    코드적용 버전: petoi_bittle_native_serialMIT

    열기
  • ros_opencat · pinned MIT primary software files

    코드적용 버전: petoi_bittle_ros1_noetic_85962928MIT

    열기
  • ros_opencat ROS2 branch · pinned MIT code

    코드적용 버전: petoi_bittle_ros2_bdec9d34MIT

    열기
  • OpenCat 펌웨어 (NyBoard)

    코드MIT

    열기
  • NyBoard V1.0 제어 보드 인터페이스

    하드웨어

    열기
  • Petoi 데스크톱: 설정·보정

    도구

    열기
  • OpenCat Python 직렬 제어 안내

    안내

    열기

상용화 상태

상태
상용
가격
289달러부터 (STEM Lite 조립 키트; 다른 키트 별도 가격)
공개일
2020년

배치 기록

상태는 과거 자료에 기반하며 이후 운영 상황은 알 수 없습니다.

배치 기록 1 · 시범 운영 1 · 프로젝트 실제 대수 · 미공개

협력 주체
Bluefield State University · 운영사
적용 분야
Education Platform
주요 작업
Introduce high-school students to robotics by assembling and programming Petoi Bittle quadrupeds with block-based coding, then programming movement and dance behaviors교육 및 훈련 지원
위치
Dickason Hall, Bluefield State University, Bluefield, West Virginia, United States
시작
2023
최근 검증
2026-10-11
근거 범위

Petoi reports that its exact Bittle quadruped was featured in the inaugural one-week President’s Emerging Scholars Academy program at Bluefield State University. Students assembled the robots, used Scratch block-based coding, and programmed movement behaviors. Petoi says the academy began in summer 2023; WVVA’s June 19, 2023 report independently confirms that the academy launched that year and its students built robotic dogs on campus. The exact camp start day, robot count, payment, and current use are not disclosed.

배치 타임라인 · 1

  1. Bittle featured in the inaugural PESA one-week robotics program
검증된 자료 기준이며 실시간 운영 상태가 아닙니다.2026-10-11

타임라인

  1. 로봇 공개
    Bittle
출처 또는 수정 제안 보내기