PetoiNybble
NybbleはPetoiの木製オープンソースロボット猫キットです。11個のサーボ関節、超音波センサー、IMU、赤外線リモコン、モバイル・デスクトップアプリを備え、OpenCat、Arduino、Python、ブロックプログラミングとRaspberry Pi拡張でロボット学習に活用できます。

インテリジェンス・プロフィール
実験は標準搭載を意味しません。根拠は記載されたモデルバージョンにのみ適用されます。
能力マップ
Petoi's official FAQ lists balancing among Nybble's available robot-cat actions.
The official page states that Nybble can be controlled with the included infrared remote or Petoi mobile and desktop apps.
ハードウェア仕様
本体仕様
運動性能
機械・取付
機械構造
センサー
バッテリーと稼働時間
計算プラットフォーム
インタラクションと通信
開発と拡張
二次開発
Nybble現在のモデル
条件付きで開発可能Nybble 専用 docs と serial Python/C++ を確認。legacy NyBoard と新 ESP32 世代を分離。board/servo/firmware/model/校正/library を整合。標準四足・任意腕なし0。software grant と他資産を区別。
Use the model-specific board firmware: NyBoard/ATmega328P, selecting the actual Bittle or Nybble model; NyBoard revisions may require different serial baud rates. Manufacturer Python docs specify Python>=3.6 and pyserial3.5; use the dependency versions of the matching checkout. The C++ CMake serial client exposes joint sequences/simultaneous targets, while Python m/M use calibrated degree targets and ASCII/binary framing. Configure actual port, power, servo offsets and active-index map: the logical16-slot packet is not16physical actuators. Native serial motion does not establish joint-velocity/torque/FF or map-navigation APIs. Distinguish commanded angle reporting from actual feedback; ESP32 f-feedback requires supported servo hardware.
開発機能
専用 board/model firmware・baud/port/power/zero/active map を整合。Python>=3.6/pyserial3.5 は docs の条件で checkout 依存を優先。C++ sequence/simultaneous と Python m/M は校正 degree target。16 logical slot を実16軸とせず velocity/torque/FF/navigation/実測 feedback を推測しない。
確認済みの制約
- 専用 board/model firmware・baud/port/power/zero/active map を整合。Python>=3.6/pyserial3.5 は docs の条件で checkout 依存を優先。C++ sequence/simultaneous と Python m/M は校正 degree target。16 logical slot を実16軸とせず velocity/torque/FF/navigation/実測 feedback を推測しない。
情報源 · 3
- 公式raw.githubusercontent.com ↗確認日: 2026-11-06
- 公式docs.petoi.com ↗確認日: 2026-11-06
- 公式docs.petoi.com ↗確認日: 2026-11-06
オープンソースと製作資料
Nybble キット組立ガイド
ソフトウェアオープンソース
ソースコードとライセンスを検証済みです。各資料の利用条件に従ってください。
関連資料
- 開く
OpenCat-Quadruped-Robot · pinned MIT primary software files
コード対象バージョン: petoi_nybble_native_serialMIT
- 開く
opencat_serial_cpp · pinned MIT primary software files
コード対象バージョン: petoi_nybble_native_serialMIT
- 開く
ros_opencat · pinned MIT primary software files
コード対象バージョン: petoi_nybble_ros1_noetic_85962928MIT
- 開く
ros_opencat ROS2 branch · pinned MIT code
コード対象バージョン: petoi_nybble_ros2_bdec9d34MIT
- 開く
OpenCat ファームウェア(NyBoard)
コードMIT
- 開く
NyBoard V1.0 制御基板インターフェース
ハードウェア
- 開く
Petoi デスクトップ:設定・校正
ツール
- 開く
OpenCat Python シリアル制御ガイド
ガイド
商用ステータス
タイムライン
- ロボット公開Nybble