PetoiNybble
Nybble is Petoi’s open-source wooden robot cat kit for learning legged robotics. It combines 11 servo joints, ultrasonic sensing, an IMU, infrared control, mobile and desktop apps, and OpenCat programming. The modular platform supports Arduino, Python, block coding, and Raspberry Pi expansion for students, hobbyists, makers, and robotics educators.

Intelligence Profile
Experiments do not imply factory configuration. Evidence applies only to the named model version.
Capability Map
Petoi's official FAQ lists balancing among Nybble's available robot-cat actions.
The official page states that Nybble can be controlled with the included infrared remote or Petoi mobile and desktop apps.
Hardware Specification
Physical Specifications
Mobility & Payload
Mechanical and mounting
Mechanical Structure
Sensors
Battery and Runtime
Compute Platform
Interaction and Communication
Development and Expansion
Development support
NybbleCurrent model
Conditional accessNybble has model-scoped manufacturer programming documentation and serial Python/C++ interfaces. This is the legacy NyBoard model, using the NyBoard OpenCat build; the newer ESP32 Nybble Q/Bittle X V2 hardware is separate. Match the delivered board revision, servo variant, firmware model/calibration and host library. The reviewed body is the standard quadruped without an optional manipulation-arm add-on; legs are not counted as execution arms. Open source firmware/API code does not by itself license all hardware, dependencies or hosted assets.
Use the model-specific board firmware: NyBoard/ATmega328P, selecting the actual Bittle or Nybble model; NyBoard revisions may require different serial baud rates. Manufacturer Python docs specify Python>=3.6 and pyserial3.5; use the dependency versions of the matching checkout. The C++ CMake serial client exposes joint sequences/simultaneous targets, while Python m/M use calibrated degree targets and ASCII/binary framing. Configure actual port, power, servo offsets and active-index map: the logical16-slot packet is not16physical actuators. Native serial motion does not establish joint-velocity/torque/FF or map-navigation APIs. Distinguish commanded angle reporting from actual feedback; ESP32 f-feedback requires supported servo hardware.
Development capabilities
Sources · 3
- Officialraw.githubusercontent.com ↗Verified: 2026-11-06
- Officialdocs.petoi.com ↗Verified: 2026-11-06
- Officialdocs.petoi.com ↗Verified: 2026-11-06
Open source & build resources
Nybble kit assembly guide
SoftwareOpen source
Source and a verified open-source license are available. Follow the terms of each resource.
Hardware designPartial hardware documentation
Official NyBoard V1.0 logic diagram, components and electrical interfaces. Applies to kits fitted with this board; complete robot fabrication files and hardware licensing remain unverified.
View explanationBuild resourcesAssembly guide only
Official Nybble kit assembly steps with illustrations and video. Requires the kit parts; a complete independently sourced BOM and fabrication files remain unverified.
View explanationRelated resources
- Open
OpenCat-Quadruped-Robot · pinned MIT primary software files
CodeApplicable version: petoi_nybble_native_serialMIT
- Open
opencat_serial_cpp · pinned MIT primary software files
CodeApplicable version: petoi_nybble_native_serialMIT
- Open
ros_opencat · pinned MIT primary software files
CodeApplicable version: petoi_nybble_ros1_noetic_85962928MIT
- Open
ros_opencat ROS2 branch · pinned MIT code
CodeApplicable version: petoi_nybble_ros2_bdec9d34MIT
- Open
OpenCat firmware (NyBoard)
CodeMIT
- Open
NyBoard V1.0 controller interfaces
Hardware
- Open
Petoi Desktop App: setup and calibration
Tool
- Open
OpenCat Python serial-control guide
Guide
Commercial Status
Timeline
- Robot releaseNybble