PetoiNybble
Nybble ist ein quelloffenes Roboterkatzen-Bauset aus Holz von Petoi zum Erlernen der Beinrobotik. Es kombiniert 11 Servogelenke, Ultraschallsensorik, eine IMU, Infrarotsteuerung, Mobil- und Desktop-Apps sowie OpenCat-Programmierung. Die modulare Plattform unterstützt Arduino, Python, Blockprogrammierung und Raspberry-Pi-Erweiterungen für Schülerinnen und Schüler, Hobbyanwender, Maker und Robotik-Lehrkräfte.

Intelligence-Profil
Versuche bedeuten keine Serienausstattung. Belege gelten nur für die genannte Modellversion.
Fähigkeitenkarte
Petoi's official FAQ lists balancing among Nybble's available robot-cat actions.
The official page states that Nybble can be controlled with the included infrared remote or Petoi mobile and desktop apps.
Hardwarespezifikationen
Physische Spezifikationen
Mobilität und Nutzlast
Mechanik und Montage
Mechanische Struktur
Sensoren
Akku und Laufzeit
Rechenplattform
Interaktion und Kommunikation
Entwicklung und Erweiterung
Entwicklungsunterstützung
NybbleAktuelles Modell
Bedingter ZugangNybble has model-scoped manufacturer programming documentation and serial Python/C++ interfaces. This is the legacy NyBoard model, using the NyBoard OpenCat build; the newer ESP32 Nybble Q/Bittle X V2 hardware is separate. Match the delivered board revision, servo variant, firmware model/calibration and host library. The reviewed body is the standard quadruped without an optional manipulation-arm add-on; legs are not counted as execution arms. Open source firmware/API code does not by itself license all hardware, dependencies or hosted assets.
Use the model-specific board firmware: NyBoard/ATmega328P, selecting the actual Bittle or Nybble model; NyBoard revisions may require different serial baud rates. Manufacturer Python docs specify Python>=3.6 and pyserial3.5; use the dependency versions of the matching checkout. The C++ CMake serial client exposes joint sequences/simultaneous targets, while Python m/M use calibrated degree targets and ASCII/binary framing. Configure actual port, power, servo offsets and active-index map: the logical16-slot packet is not16physical actuators. Native serial motion does not establish joint-velocity/torque/FF or map-navigation APIs. Distinguish commanded angle reporting from actual feedback; ESP32 f-feedback requires supported servo hardware.
Entwicklungsfunktionen
Quellen · 3
- Offiziellraw.githubusercontent.com ↗Geprüft: 2026-11-06
- Offizielldocs.petoi.com ↗Geprüft: 2026-11-06
- Offizielldocs.petoi.com ↗Geprüft: 2026-11-06
Open Source und Bauunterlagen
Nybble Bausatz-Montageanleitung
SoftwareOpen Source
Quellcode und Open-Source-Lizenz sind verifiziert. Beachten Sie die jeweiligen Lizenzbedingungen.
HardwaredesignTeilweise Hardware-Dokumentation
Logikdiagramm, Bauteile und Schnittstellen des NyBoard V1.0 für entsprechend ausgestattete Kits. Vollständige Fertigungsdaten und Hardware-Lizenzen sind nicht verifiziert.
Erläuterung ansehenBauunterlagenNur Montageanleitung
Offizielle bebilderte Montageanleitung mit Videos für den Nybble-Bausatz. Kit-Teile erforderlich; eine vollständige unabhängige Beschaffungsliste und Fertigungsdaten sind nicht verifiziert.
Erläuterung ansehenWeitere Ressourcen
- Öffnen
OpenCat-Quadruped-Robot · pinned MIT primary software files
CodeGültige Version: petoi_nybble_native_serialMIT
- Öffnen
opencat_serial_cpp · pinned MIT primary software files
CodeGültige Version: petoi_nybble_native_serialMIT
- Öffnen
ros_opencat · pinned MIT primary software files
CodeGültige Version: petoi_nybble_ros1_noetic_85962928MIT
- Öffnen
ros_opencat ROS2 branch · pinned MIT code
CodeGültige Version: petoi_nybble_ros2_bdec9d34MIT
- Öffnen
OpenCat-Firmware (NyBoard)
CodeMIT
- Öffnen
NyBoard V1.0 Controller-Schnittstellen
Hardware
- Öffnen
Petoi Desktop App: Einrichtung und Kalibrierung
Werkzeug
- Öffnen
OpenCat Python-Anleitung zur seriellen Steuerung
Anleitung
Kommerzieller Status
Zeitachse
- RoboterveröffentlichungNybble