TheRobotStudioSO-100
SO-100 is an open-source, 3D-printable robot arm designed by TheRobotStudio with Hugging Face. A separate leader can teleoperate the follower to collect demonstrations, train manipulation policies in LeRobot and replay them on the physical arm.

Intelligence Profile
Experiments do not imply factory configuration. Evidence applies only to the named model version.
Hardware Specification
Degrees of freedom and drive
Degrees of Freedom
Mechanical Structure
Development support
SO-100Current model
OpenSO-101
OpenDevelopment configuration: SO-100 LeRobot follower + leader reference
The designer explicitly supports LeRobot for SO-100; the pinned LeRobot revision registers both so100_follower and so101_follower against the documented Python position-control implementation. Match the exact arm, Feetech motors, power supply, USB bus, motor IDs and calibration. A leader arm is an operator input device, not an additional execution arm.
Development capabilities
Documented constraints
- This reviewed profile sends Goal_Position targets. Torque enable/disable, gripper torque/current protection limits and PID gains do not establish direct torque, feedforward or independent joint-velocity APIs. Cameras are optional hardware; dataset upload is optional and requires a Hub account/token when enabled. One follower executes; the separate leader supplies operator input.
Sources · 5
- Officialraw.githubusercontent.com ↗Verified: 2026-11-05
- Officialraw.githubusercontent.com ↗Verified: 2026-11-05
- Officialraw.githubusercontent.com ↗Verified: 2026-11-05
- Officialraw.githubusercontent.com ↗Verified: 2026-11-05
- Officialraw.githubusercontent.com ↗Verified: 2026-11-05
Open source & build resources
Build this robot
SoftwarePartially available
Examples or supporting tools are available; this does not establish access to the core system.
Hardware designPublicly available
Resources can be accessed; publication alone does not grant reuse rights.
Build resourcesComplete
BOM, structure files and assembly instructions are available for the same version. Check each license before reuse.
Related resources
- Open
SO-100/SO-101 published design files · Apache-2.0
HardwareApplicable version: so100_lerobot_62a171e7Apache-2.0
- Open
LeRobot Python software · Apache-2.0
CodeApplicable version: so100_lerobot_62a171e7Apache-2.0
- Open
SO-100 printable structure files
HardwareApplicable version: SO-100Apache-2.0
- Open
SO-100 bill of materials
BOMApplicable version: SO-100Apache-2.0
- Open
SO-100 assembly and printing guide
GuideApplicable version: SO-100Apache-2.0
- Open
LeRobot control library for SO-100
CodeApplicable version: SO-100Apache-2.0
Commercial Status
Dataset inclusion
- MolmoAct2 SO-100/101 DatasetData collection
Timeline
- Robot releaseSO-100
- Model releaseSmolVLA base
- Model releaseMolmoAct2