DUCO RobotsBSJ17
- Output speed · Peak
- 30 rpm
- Weight
- 1.35 kg
- Outer diameter
- 96 mm
- Operating voltage · Rated
- 48 V
BSJ17 is a DUCO integrated joint module for humanoid robots. Its hollow wiring design integrates drive, control, transmission and sensing, with closed-loop torque control and full-state feedback. It weighs 1.35 kg, uses a 100:1 reduction ratio and a 48 V DC supply, and communicates over EtherCAT.

Technical specifications
Output & transmission
- Output torque · Start/stop allowable
66 N·m
- Output torque · Average load
48.5 N·m
- Output torque · Maximum instantaneous
107 N·m
- Output speed · Peak
30 rpm
Dimensions & installation
- Weight
1.35 kg
- Outer diameter
96 mm
- Axial length
103.7 mm
- Hollow bore diameter
9 mm
Electrical
- Operating voltage · RatedDC power input
48 V
Encoders & feedback
- Encoder resolutionOutput-side encoder
19 bit
Communication & control
- Communication protocol
EtherCAT
Scope not bound
- Control mode
Closed-loop torque control
Scope not bound
- Control loop rate
1000 Hz
Scope not bound
Braking & environment
- IP rating
IP54
Construction & components
- Reducer integration
Integrated
Scope not bound
- Encoder integration
Integrated
Scope not bound
- Driver integration
Integrated
Scope not bound
- Controller integration
Integrated
Scope not bound
Other specifications
- Proprioceptive feedback
Full-state feedback
Scope not bound
Model-level records · configuration applicability unverified
- Positioning / Application
- Humanoid robot joint
- Gear Ratio
- 100:1
- Internal Wiring
- Hollow wiring
- Joint Type
- Bionic integrated joint module
Source · 3
2026-09-16 · 2026-09-17
Weight · 1.35 · 产品参数 / bsj17
Operating voltage · 48 · 产品参数 / bsj17
Communication protocol · ethercat
Control loop rate · 控制周期 · 控制周期达到1000hz · 产品概览
IP rating · ip54 · 产品参数 / bsj17
Encoder resolution · 输出端编码器分辨率 · 19 · 产品参数
Hollow bore diameter · 9 · 产品参数 / bsj17
Output speed · 30 · 产品参数 / bsj17
Output torque · 启停峰值扭矩(N·m) · 66 · 产品参数 / bsj17
Output torque · 平均负载转矩容许最大值(N·m) · 48.5 · 产品参数 / bsj17
Output torque · 瞬间容许最大扭矩(N·m) · 107 · 产品参数 / bsj17
Gear Ratio · 100
2026-09-16
Control mode · torque
Proprioceptive feedback · full_state
Controller integration · integrated
Driver integration · integrated
Encoder integration · integrated
Reducer integration · integrated
Positioning / Application · Humanoid robot joint
Internal Wiring · Hollow wiring
Joint Type · Bionic integrated joint module
Compare family models
Choose 2–4 configurations
Compare selected configurations| Technical specifications | BSJ11100:1 standard configuration | BSJ17100:1 standard configuration |
|---|---|---|
| Weight | 0.45 kg | 1.35 kg |
| Operating voltage · Rated | 48 V | 48 V |
| Communication protocol | EtherCATScope not bound | EtherCATScope not bound |
| IP rating | IP54 | IP54 |
| Encoder resolution | 19 bit | 19 bit |
| Outer diameter | 65 mm | 96 mm |
| Output speed · Peak | 30 rpm | 30 rpm |
| Output torque · Start/stop allowable | 11 N·m | 66 N·m |
| Output torque · Average load | 8.9 N·m | 48.5 N·m |
| Output torque · Maximum instantaneous | 25 N·m | 107 N·m |