HEBI Robotics logoHEBI Robotics

H25-90

H-Serie-Aktuator mit 101:1.

Preis
Preis nicht veröffentlicht
Typ
Komponenten · Integrierte Gelenke
Status
Kommerziell
Verfügbarkeit
Im Verkauf
Kaufmöglichkeit
Hersteller kontaktieren
Veröffentlichungsdatum
Unbekannt
Land/Region
Vereinigte Staaten
Abtriebsdrehmoment · Dauer
90 N·m
Abtriebsdrehzahl · Maximum
50 rpm

Der H25-90 ist ein modularer Robotikaktor der HEBI H-Serie mit einem Harmonic-Getriebe von 101:1. Er integriert einen bürstenlosen Motor, Encoder und Steuerelektronik in einem für IP65 ausgelegten Gehäuse für drehmomentstarke kundenspezifische Robotergelenke.

H

Technische Daten

Abtrieb & Übertragung

Abtriebsdrehmoment · Dauer

90 N·m

Abtriebsdrehmoment · Spitzenwert

180 N·m

Abtriebsdrehzahl · Maximum

50 rpm

Modelldaten · Konfigurationsbezug ungeprüft
Entwicklungszugang
Bedingt unterstützt
Aktuatortechnologie
Modularer Robotikaktor
Schutzart (IP)
Für IP65 ausgelegt
Tiefe
11.4 cm
Länge
12.6 cm
Gewicht
2.9 kg
Breite
11.5 cm
Übersetzungsverhältnis
101:1
Betriebsspannung
24–48 V
Not-Halt
M-Stop-Leitungseingang, 5–48 V DC
Betriebsfeuchtigkeit
0–90
Betriebstemperatur
-10–50 °C
Sicherheitssystem
Optionale Bremse, bei Stromausfall verriegelt
Quelle · 2
docs.hebi.us

2026-09-24 · 2026-11-06

Abtriebsdrehzahl · Max Speed · 50 RPM · 2, Technical specifications

Abtriebsdrehmoment · Cont. Torque · 90 N-m · 2, Technical specifications

Abtriebsdrehmoment · Peak Torque · 180 N-m · 2, Technical specifications

Entwicklungszugang · H25-90 appears in the series configuration table; series datasheet explicitly documents C/C++ and Python APIs.

Aktuatortechnologie · Modularer Robotikaktor

Schutzart (IP) · Für IP65 ausgelegt

Tiefe · 11.4 cm

Länge · 12.6 cm

Gewicht · 2.9 kg

Breite · 11.5 cm

Betriebsspannung · 24–48 V

Not-Halt · M-Stop-Leitungseingang, 5–48 V DC

Betriebstemperatur · -10–50 °C

Sicherheitssystem · Optionale Bremse, bei Stromausfall verriegelt

docs.hebi.us

2026-09-24

Übersetzungsverhältnis · 101:1

Betriebsfeuchtigkeit · 0–90

Modelle der Familie vergleichen

2–4 Konfigurationen auswählen

Ausgewählte Konfigurationen vergleichen
Technische DatenH25-90StandardkonfigurationH25-140Standardkonfiguration
Abtriebsdrehzahl · Maximum50 rpm—
Abtriebsdrehmoment · Dauer90 N·m—
Abtriebsdrehmoment · Spitzenwert180 N·m—

Entwicklungsunterstützung

H25-140

Bedingter Zugang

H25-140 is explicitly listed in the official series datasheet with C/C++ and Python API support. Use compatible module firmware, matching API distribution, Ethernet discovery, exact family/name, calibrated actuator limits and model-specific gains. The reviewed native profile uses strategy 5 (FOC). H-Series motor torque feedback is current-based; this is not independent output strain-gauge torque measurement.

H25-90Aktuelles Modell

Bedingter Zugang

H25-90 is explicitly listed in the official series datasheet with C/C++ and Python API support. Use compatible module firmware, matching API distribution, Ethernet discovery, exact family/name, calibrated actuator limits and model-specific gains. The reviewed native profile uses strategy 5 (FOC). H-Series motor torque feedback is current-based; this is not independent output strain-gauge torque measurement.

H25-45

Bedingter Zugang

H25-45 is explicitly listed in the official series datasheet with C/C++ and Python API support. Use compatible module firmware, matching API distribution, Ethernet discovery, exact family/name, calibrated actuator limits and model-specific gains. The reviewed native profile uses strategy 5 (FOC). H-Series motor torque feedback is current-based; this is not independent output strain-gauge torque measurement.

H25-90 is explicitly listed in the official series datasheet with C/C++ and Python API support. Use compatible module firmware, matching API distribution, Ethernet discovery, exact family/name, calibrated actuator limits and model-specific gains. The reviewed native profile uses strategy 5 (FOC). H-Series motor torque feedback is current-based; this is not independent output strain-gauge torque measurement.

Entwicklungsfunktionen

GelenkregelungBedingt unterstützt

Each rotary module accepts joint-level position, velocity and effort commands through the discovered Group; radians, rad/s and N m apply in this strategy. This standalone actuator is not a complete arm or Cartesian controller.

DatenerfassungBedingt unterstützt

Real Group command/feedback logging uses start_log/stop_log or C++ startLog/stopLog and .hebilog at the configured feedback frequency. Check log creation and directory permissions; Python log rollover may need a background thread. This is raw module telemetry, not an annotated multimodal demonstration dataset.

Python SDKBedingt unterstützt

Pinned Python examples use hebi-py >=2.2.0, Python3 and GroupCommand.position/velocity/effort. Match the installed API/firmware and exact module identity; Python2 is excluded.

C++ SDKBedingt unterstützt

Pinned examples use native C++ GroupCommand and fetch hebi-cpp 3.15.0 with a fixed distribution checksum. Dependencies and matching firmware are required; no build or hardware execution is claimed.

PositionsbefehleBedingt unterstützt

GroupCommand.setPosition/position commands a rotary joint angle in radians with the matching position controller/gains enabled. It is an instantaneous setpoint; build and refresh trajectories separately.

GeschwindigkeitsbefehleBedingt unterstützt

The dedicated velocity example sets GroupCommand velocity in rad/s without a position target. Clear prior position commands with NaN and configure the velocity controller for the selected strategy; this is not merely a speed limit.

PD + VorsteuermomentBedingt unterstützt

The combined position/velocity/effort example adds acceleration*inertia effort while tracking position and velocity. Strategy 5 (FOC) accepts additional user effort in N m; tune model-specific gains/inertia. It is not proof of whole-arm gravity compensation accuracy.

Direkte DrehmomentbefehleBedingt unterstützt

The dedicated effort example sends N m torque without position/velocity targets. Clear both previous targets using NaN and select strategy 5 (FOC). DIRECT_PWM normalized duty and direct FOC current/voltage are different modes. H-Series motor torque feedback is current-based; this is not independent output strain-gauge torque measurement.

Dokumentierte Einschränkungen

  • H25-90 is explicitly listed in the official series datasheet with C/C++ and Python API support. Use compatible module firmware, matching API distribution, Ethernet discovery, exact family/name, calibrated actuator limits and model-specific gains. The reviewed native profile uses strategy 5 (FOC). H-Series motor torque feedback is current-based; this is not independent output strain-gauge torque measurement. Position/velocity targets are rad/rad/s and rotary effort is N m only in the selected control strategy. Clear stale targets explicitly with NaN; an empty command may retain setpoints, and zero effort actively requests zero torque rather than disabling control. Refresh commands within configured command lifetime (publisher default 250ms); do not treat this as a motion-performance guarantee. Persist required strategy/gain settings deliberately across reboot. H default strategy5 differs from X/R strategy4. Examples use one test module and hardcoded names; adapt identities, not firmware modes blindly. Example-code licensing excludes binary APIs/dependencies/firmware/hardware. No exact 4DoF arm-kit integration is inferred.
Quellen · 9

Open Source und Bauunterlagen

Software

Teilweise veröffentlicht

Beispiele oder Hilfswerkzeuge sind verfügbar; das Kernsystem ist damit nicht als offen belegt.

Hardwaredesign

Teilweise Hardware-Dokumentation

Die offizielle H-Serien-Dokumentation behandelt H25-45, H25-90 und H25-140 mit Maßzeichnungen, Klemmringen, Adaptern und Armlink-CAD sowie Strom-, Glasfaser-Ethernet- und M-Stop-Verdrahtung. Teilweise Integrationsunterlagen; vollständige Fertigungsdateien und Hardwarelizenz sind nicht verifiziert.

Erläuterung ansehen

Bauunterlagen

Nicht verifiziert

Für diesen Bereich liegen noch keine ausreichenden verifizierten Belege vor.

TypRessourceLizenzGültige VersionÖffnen
CodeHEBI native C++ examples · pinned Apache-2.0 primary code

GitHub · HebiRobotics/hebi-cpp-examples

The reviewed Apache-2.0 grant covers the primary example-project code at this commit. Downloaded C++ API wrapper/C binary distribution, dependencies, Python examples, firmware, actuator hardware and complete robot kits have separate licensing/access scope.

Apache-2.0hebi_h25_90_native_group_commandÖffnen GitHub
HardwareHEBI H25: CAD-, Montage- und Verdrahtungsunterlagen

docs.hebi.us

Die offizielle H-Serien-Dokumentation behandelt H25-45, H25-90 und H25-140 mit Maßzeichnungen, Klemmringen, Adaptern und Armlink-CAD sowie Strom-, Glasfaser-Ethernet- und M-Stop-Verdrahtung. Teilweise Integrationsunterlagen; vollständige Fertigungsdateien und Hardwarelizenz sind nicht verifiziert.

—H25-90Öffnen Dokumentation
WerkzeugH25-90: Strategy-5-Verstärkungskonfiguration

docs.hebi.us

Offizielle XML-Ausgangsverstärkungen für H25-90. Die H-Serie verwendet Strategy 5; gemäß Herstellerhinweisen an Mechanik und Anwendung anpassen. Konfigurationsdatei, keine Aktuator-Firmwarequellen oder Roboter-Fertigungsunterlagen. Lizenzrechte sind nicht verifiziert.

—H25-90Öffnen Dokumentation

Kommerzieller Status

Status
Kommerziell
Preis
Preis nicht veröffentlicht
Veröffentlichungsdatum
Unbekannt
Quelle oder Korrektur einreichen