TheRobotStudioSO-100
SO-100은 TheRobotStudio와 Hugging Face가 공동 설계한 3D 프린팅 방식의 오픈소스 로봇 팔입니다. 리더로 팔로워를 원격 조작해 시범 데이터를 수집하고 LeRobot에서 조작 정책을 학습할 수 있습니다.

인텔리전스 프로필
실험은 기본 탑재를 의미하지 않습니다. 근거는 명시된 모델 버전에만 적용됩니다.
하드웨어 사양
자유도 및 구동
자유도
기계 구조
개발 지원
SO-100현재 모델
개발 개방SO-101
개발 개방개발 구성: SO-100 LeRobot follower + leader reference
The designer explicitly supports LeRobot for SO-100; the pinned LeRobot revision registers both so100_follower and so101_follower against the documented Python position-control implementation. Match the exact arm, Feetech motors, power supply, USB bus, motor IDs and calibration. A leader arm is an operator input device, not an additional execution arm.
개발 기능
문서화된 제약
- This reviewed profile sends Goal_Position targets. Torque enable/disable, gripper torque/current protection limits and PID gains do not establish direct torque, feedforward or independent joint-velocity APIs. Cameras are optional hardware; dataset upload is optional and requires a Hub account/token when enabled. One follower executes; the separate leader supplies operator input.
출처 · 5
- 공식raw.githubusercontent.com ↗확인일: 2026-11-05
- 공식raw.githubusercontent.com ↗확인일: 2026-11-05
- 공식raw.githubusercontent.com ↗확인일: 2026-11-05
- 공식raw.githubusercontent.com ↗확인일: 2026-11-05
- 공식raw.githubusercontent.com ↗확인일: 2026-11-05
오픈 소스 및 제작 자료
로봇 만들기
소프트웨어일부 공개
예제나 보조 도구만 공개되어 있으며 핵심 시스템의 공개를 의미하지 않습니다.
하드웨어 설계공개됨
자료를 받을 수 있지만 공개 자체가 재사용 권한을 의미하지는 않습니다.
제작 자료자료 완비
동일 버전의 부품 목록, 구조 파일, 조립 지침이 있습니다. 각 라이선스를 확인하세요.
관련 자료
- 열기
SO-100/SO-101 published design files · Apache-2.0
하드웨어적용 버전: so100_lerobot_62a171e7Apache-2.0
- 열기
LeRobot Python software · Apache-2.0
코드적용 버전: so100_lerobot_62a171e7Apache-2.0
- 열기
SO-100 출력 가능한 구조 파일
하드웨어적용 버전: SO-100Apache-2.0
- 열기
SO-100 부품 목록
부품 목록적용 버전: SO-100Apache-2.0
- 열기
SO-100 조립 및 출력 안내
안내적용 버전: SO-100Apache-2.0
- 열기
SO-100용 LeRobot 제어 라이브러리
코드적용 버전: SO-100Apache-2.0
상용화 상태
데이터셋 수록
타임라인
- 로봇 공개SO-100
- 모델 공개SmolVLA base
- 모델 공개MolmoAct2