maxonHigh Efficiency Joints (HEJ)
- Output torque · Continuous
- 150 N·m
- Output speed
- ≈95.5 rpm
- Operating voltage
- 20–60 V
The HEJ 110 is an integrated robotic joint under development by maxon. The manufacturer lists 150 N·m of continuous torque and 300 N·m of peak torque, with a peak speed of about 10 rad/s at 48 V. The joint weighs less than 3 kg, has a listed operating range of 20–60 V and uses EtherCAT.
Technical specifications
Output & transmission
- Output torque · Continuous
150 N·m
Scope not bound
- Output torque · Peak
300 N·m
Scope not bound
- Output speed
≈95.5 rpm
Scope not bound
48 V DC
Dimensions & installation
- Weight
< 3 kg
Scope not bound
Electrical
- Operating voltage
20–60 V
Scope not bound
Communication & control
- Communication protocol
EtherCAT
Scope not bound
Model-level records · configuration applicability unverified
- Joint Type
- Integrated robotic joint
Source · 1
2026-11-21
Weight · Mass · < 3 kg · Comparison table, HEJ 110 (in development) column
Operating voltage · Operating Voltage Range · 20 V – 60 V · Comparison table, HEJ 110 (in development) column
Communication protocol · Communication Bus · EtherCAT · Comparison table, HEJ 110 (in development) column
Output speed · Peak Joint Velocity (48V) · Ca. 10 rad/s · Comparison table, HEJ 110 (in development) column
Output torque · Continuous Torque · 150 Nm · Comparison table, HEJ 110 (in development) column
Output torque · Peak Torque · 300 Nm · Comparison table, HEJ 110 (in development) column
Joint Type · Integrated robotic joint
Compare family models
Choose 2–4 configurations
Compare selected configurations| Technical specifications | HEJ 50-48-30922156 rev.01 | HEJ 90-48-140Radial connectors · 831220 |
|---|---|---|
| Weight | 0.53 kg | — |
| Operating voltage · Allowed range | 30–60 V | — |
| Communication interface | EtherCAT | — |
| Backlash | 30 arcmin | — |
| Encoder resolution | 14 bit | — |
| Encoder type | Absolute | — |
| Operating current | 4.7 A | — |
| Operating current · Less than | <40 A | — |
| Operating current | 7.3 A 48 V DC | — |
| Outer diameter | ≈71.5 mm | — |
| Output speed · Maximum | 200.5352 rpm 48 V DC | — |
| Output speed · Maximum | 248.2817 rpm 60 V DC | — |
| Output torque · Rated | 11 N·m 48 V DC | — |
| Output torque · Peak | 28 N·m 48 V DC | — |
| Weight | — | 2.006 kg |
| Operating voltage · Allowed range | — | 30–60 V |
| Communication interface | — | Ethernet |
| Communication protocol | — | EtherCAT |
| IP rating | — | IP67Scope not bound |
| Backlash | — | 30 arcminScope not bound |
| Operating current · Continuous | — | 8 A |
| Operating current · Maximum | — | ≤40 A |
| Operating current | — | 30.1 A 48 V DC |
| Outer diameter | — | ≈108 mmScope not bound |
| Output speed | — | 99.3127 rpm 48 V DC |
| Output speed | — | 124.1409 rpm 60 V DC |
| Output torque · Rated | — | 75 N·m 48 V DC |
| Output torque · Peak | — | 140 N·m 48 V DC |
| Rated torque density | — | 37.39 N·m/kg Based on net joint mass dc_point · 48–48 V |
| Peak torque density | — | 69.79 N·m/kg Based on net joint mass dc_point · 48–48 V |