DAMIAODM-J Joint Motors
- Output torque · Rated
- 40 N·m
- Outer diameter
- 112 mm
DM-J10010-2EC is an integrated joint motor with dual encoders and single-turn absolute output-shaft position. It provides 40 N·m rated and 150 N·m peak torque, CAN feedback, PC tuning, firmware upgrades and dual temperature protection.

Technical specifications
Output & transmission
- Output torque · Rated
40 N·m
Scope not bound
- Output torque · Peak
150 N·m
Scope not bound
- Output speed · Rated
100 rpm
Scope not bound
- Output speed
150 rpm
Scope not bound
Dimensions & installation
- Outer diameter
112 mm
Scope not bound
- Axial length
62 mm
Scope not bound
Electrical
- Operating current · Rated
20 A
Scope not bound
- Operating current · Peak
70 A
Scope not bound
Encoders & feedback
- Encoder type
Magnetic
Scope not bound
- Encoder turn mode
Single-turn absolute output-shaft position
Scope not bound
- Encoder resolution
14 bit
Scope not bound
- Feedback signals
Velocity / Position / Torque / Motor temperature
Scope not bound
Communication & control
- Communication interface
CAN / UART
Scope not bound
- Control mode
MIT mode / Velocity mode / Position mode
Scope not bound
Braking & environment
- Protection functions
Driver and motor overtemperature protection / Overvoltage protection / Undervoltage protection / Overcurrent protection / Communication-loss protection
Scope not bound
Construction & components
- Motor integration
Integrated motor
Scope not bound
- Encoder integration
Integrated encoders
Scope not bound
- Driver integration
Integrated driver
Scope not bound
Model-level records · configuration applicability unverified
- Weight
- 1.485 kg
- Gear Ratio
- 10:1
- Joint Encoder
- Dual encoders
- Operating voltage · Rated
- 48 V
Source · 2
2026-11-17
Communication interface · CAN
Communication interface · UART
Control mode · MIT模式
Control mode · 速度模式
Control mode · 位置模式
Axial length · 62mm
Encoder resolution · 14位
Encoder turn mode · 输出轴单圈绝对位置
Encoder type · 磁编码器
Operating current · 20A
Operating current · 70A
Outer diameter · 112mm(机身非标准圆柱形,最大外廓120mm)
Output speed · 100rpm
Output speed · 150rpm
Output torque · 40NM
Output torque · 150NM
Protection functions · 驱动器与电机过温保护
Protection functions · 过压保护
Protection functions · 欠压保护
Protection functions · 过流保护
Protection functions · 通讯丢失保护
Weight · 约1485g
Gear Ratio · 10:1
Joint Encoder · 双编码器
Operating voltage · 48V
2026-11-17
Feedback signals · 速度
Feedback signals · 位置
Feedback signals · 转矩
Feedback signals · 电机温度
Driver integration · 集成驱动器
Encoder integration · 集成编码器
Motor integration · 集成电机
Compare family models
Choose 2–4 configurations
Compare selected configurations| Technical specifications | DM-J10010-2ECDM-J10010-2EC | DM-J4310-2EC V1.1DM-J4310-2EC V1.1 |
|---|---|---|
| Communication interface | CANScope not bound | CANScope not bound |
| Communication interface | UARTScope not bound | — |
| Outer diameter | 112 mmScope not bound | 57 mmScope not bound |
| Communication interface | — | UARTScope not bound |
Commercial Status
Timeline
- Robot releaseDM-J10010-2EC